March 07, 2016

Do Wrong Choose Paint Tool

In addition to the quality of the paint and mix colors to paint tool also plays an important role to produce paints in accordance with our wishes, such as; brush and roll. When is a brush and also a time when you are required to wear roll careful in the use of these tools, for it follows we will share how to choose the right paint tool ....

BRUSHES CAT
consists of three parts: bristle brushes, handles and metal fastener from those two together. Bristle brush, can be animal hair or synthetic fibers, arranged and glued together with solid resin. Choose a brush bristle tapered at the edges. It makes more flexible brush. Tapered bristle brushes are one sign of quality brushes. Do not choose the base and tip of the brush as thick fur.


Brush the cost is usually wearing a short fur that is supported by the V-shaped pieces of wood to make it look thicker. This brush can not absorb paint well and short bristles tend to leave scars kuasan (brush mark) on the paintwork. While a good brush has a bristle brush longer and more so it can absorb more paint and produce a more subtle layers of paint, so it does not leave scars kuasan. Such a brush is ideal if we want a good outcome, particularly to paint with a glossy appearance (gloss).

In general, animal hair brushes used for oil paints. Brush made of pig bristles are the best. Do not use a brush of fur animals to water-based paints (water based) for fur animals absorb water, so that it will expand and unruly. Nylon or polyester brush most suitable for water-based paints because synthetic fibers do not absorb water and therefore will not inflate.
Use a brush with a width of 3-5 inches to paint the walls or large surfaces. A smaller brush to paint furniture, frames, or parts that require higher precision.

If you buy a quality brush, clean thoroughly after each use so that it can be used repeatedly. Or you can buy some brushes are cheap, if you are quite satisfied with the results, and remove it when finished be used.

ROLLER CAT
is the best tool to paint large surfaces such as walls or palate. Selection of the appropriate roller for a particular type of work is important. Roller cheap (polyester) tend to be more splashing paint, fibers easily separated and left in the paint. Fleece (wool) is the best material because it absorbs more paint, rarely leaves scars, and not a lot of splashing paint.

To work with enamel paint, for example, to doors and walls of the kitchen, use a roller of material mohair ( delicate feathers of a certain type of goat). Adjust the size of the roller with the type of work. The thickness of the fiber / fleece depending on surface conditions, the type of paint, and to see the desired results.

Use of roller thin (less than ¼ inch) to paint a glossy (gloss) or slightly glossy (semi-gloss) on the wall flat, for example plaster, floors, and walls in general. Roller with a thickness of 3/8 inch to 1 inch is used to paint on the walls is uneven, for example, interior walls in general, concrete, sand and textured walls.

Several types of special roller:
1. Roller angle - to paint the corner and the border wall.
2. Roller trim - 3 inches long, according to repaint the narrow field.
3. Roller radiator - ¾ inch in diameter, according to repaint the back of the radiator, toilet, and heating water.
4. Special roller to paint surfaces such as pipes and pillars round.
5. roller foam - for repainting and the wrought iron staircase railing.

Grip roller with a 3-5 wire rod from end to be able to withstand the roller well, supports rotation, and durable. Do not use the handle roller's that use screws to secure the roller.



Image Source Here
Sorry, the comment functionality to Do Wrong Choose Paint Tool temporarily closed. Questions, suggestions or criticism please go to the Contact page.
 

TOP