March 08, 2016

Wall painting techniques True

In the previous article we have discussed how to create plamir to the wall with the correct composition so that it can get a good quality plamir, after a flat wall surface diplamir and refined plamir means the next job is painting the wall.

job painting the walls is a very easy job, most residents, especially men can do this job, but about the end result would have been different, depending on the technique and quality of paint used , well next time we will share the techniques of painting the walls of the right to produce maximum quality.


Here is a step-by-step technique of painting the walls for a new home:

  1. After plamir completed, wait at least 7 weeks (the longer the better) then the surface plamir smoothed by way rubbed with sandpaper, this time you can take advantage of grinding machines to perform smoothing in order to work faster and quality for maximum results.
  2. Once the surface plamir smooth, clean surface plamir with a lap and a half wet so that the dust of former plamir net of surface plamir
  3. Prepare a solution of waterproof (commercially known by the brand nodrop, Flintkote, ELASTEX, etc.) and mix it with water at a ratio of 1: 5, then kuaskan to the wall until blended, this is to prevent the paint does not seep and the growth of moss for humid room.
  4. Prepare the paint and mixed with water as much as 20%, painting the first was done by using a brush or rool with movement up and down.
  5. Let stand for 1-2 hours before painting to two, can be done while painting the walls of the other side.
  6. Painting the second time, mix the paint with 10% water if using a brush made with motion zig zag up and down, try as evenly as possible so that the paint is not visible streaks.
techniques of painting the walls of the old
  1. Get rid of all the stuff on the walls, be it photos, paintings or other, and also remove items or furniture near the wall and cover with a cloth or paper
  2. Clean the surface of the wall with a rag wet to keep dust and dirt on the wall is gone, if there are stubborn stains can be rubbed with fine sandpaper.
  3. Close all the walls are fractured and holes with plamir condensed to dry.
  4. Then do step 4 as above and next steps.
to produce the maximum quality you should also know the character and the color spectrum paint that can be read here


Image Source Here
Sorry, the comment functionality to Wall painting techniques True temporarily closed. Questions, suggestions or criticism please go to the Contact page.
 

TOP